 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TA2132BP/BF TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA2132BP,TA2132BF AM/FM Radio IC TA2132BP, TA2132BF are AM/FM Radio IC (FM F/E + AM/FM IF) which are designed for AM/FM Radios. FM Local Oscillation Voltage is set up low relativity, for NEW FCC. TA2132BP Features * * * * * For NEW FCC. AM detector coil, FM IFT, IF coupling condenser are not needed. For adopting ceramic discriminator, it is not necessary to adjust the FM quad detector circuit. Built-in varactor diode for AFC Low supply current: (VCC = 3 V, Ta = 25C) ICCq (FM) = 7.3 mA (typ.) ICCq (AM) = 3.6 mA (typ.) * Operating supply voltage range: VCC = 1.8~7 V (Ta = 25C) Note: The IC may be destroyed due to incorrect orientation of device's mounting. Weight DIP16-P-300-2.54A : 1.00 g (typ.) SSOP16-P-225-1.00A : 0.14 g (typ.) TA2132BF 1 2002-07-23 TA2132BP/BF Block Diagram FM AM AM RF IN FM RF OUT AM/FM SW FM OSC AM OSC AFC DET OUT QUAD 16 15 14 13 12 11 10 9 AM RF FM/AM FM OSC AM OSC AF BUFF FM DET AM DET FMRF FM MIX AM MIX AGC FMIF AMIF 1 FM RF IN BPF 2 RF GND 3 MIX OUT 4 AGC 5 VCC 6 FM IF IN 7 AM IF IN 8 GND 2 2002-07-23 TA2132BP/BF Explanation of Terminals Pin No. (Terminal Voltage: Typical DC voltage at no signal with test circuit, VCC = 3 V, Ta = 25C) Characteristics Internal Circuit DC Voltage (V) AM FM 15 1 FM RF IN 1 kW 60 pF 1 RF GND 2 0 0.8 2 RF GND (GND for FM RF, FM OSC stage) 3/4 0 0 VCC 5 3 3 MIX OUT FM MIX AM MIX 2 8 GND 3.0 2.9 RF GND VCC 5 20 kW 4 100 kW 1 kW GND 8 (AGC) (IF level) 5 VCC (VCC for AM, FM IF stage) 3/4 5 kW AGC (FM IF level output) 4 0 0 1 kW 3.0 3.0 6 FM IF IN 330 W VCC 5 6 3.0 3.0 GND 8 3 2002-07-23 TA2132BP/BF Pin No. Characteristics Internal Circuit DC Voltage (V) AM FM 7 AM IF IN 7 3 kW 3 kW 2.3 2.6 GND 8 8 GND (GND for AM, FM IF stage) 3/4 0 0 9 VCC 5 9 QUAD 2.5 2.2 GND 8 VCC 5 AM 10 DET OUT FM 750 W 10 1.0 0.9 a GND 8 b a b LOW (R) FM, HIGH (R) AM LOW (R) AM, HIGH (R) FM 11 11 AFC 2 3/4 3/4 4 2002-07-23 TA2132BP/BF Pin No. Characteristics Internal Circuit DC Voltage (V) AM FM 12 VCC 12 AM OSC 5 3.0 3.0 GND 8 13 14 13 FM OSC 3.0 3.0 RF GND 2 14 AM/FM SW 14 * SW condition V14 = VCC (R) FM V14 = OPEN (R) AM * VCC for FM RF, FM OSC stage 8 GND 3/4 3.0 15 FM RF OUT Cf-Pin 1 3.0 3.0 VCC 5 AGC 16 16 AM RF IN 3.0 3.0 GND 8 5 2002-07-23 TA2132BP/BF Maximum Ratings (Ta = 25C) Characteristics Supply voltage Power dissipation Operating temperature Storage temperature TA2132BP TA2132BF Symbol VCC PD (Note 1) Topr Tstg Rating 8 750 350 -25~75 -55~150 Unit V mW C C Note 1: Deleted above Ta = 25C in the proportion of 6 mW/C for TA2132BP and of 2.8 mW/C for TA2132BF. Electrical Characteristics (Unless otherwise specified, Ta = 25C, VCC = 3 V, F/E : f = 98 MHz, fm = 1 kHz FM IF : f = 10.7 MHz, Df = 75 kHz, fm = 1 kHz AM : f = 1 MHz, MOD = 30%, fm = 1 kHz) Test Condition FM mode, Vin = 0 AM mode, Vin = 0 -3dB limiting point S/N = 40dB fOSC = 108 MHz -3dB limiting point Vin = 80dBmV EMF Vin = 80dBmV EMF Vin = 80dBmV EMF Vin = 80dBmV EMF Vin = 28dBmV EMF Vin = 60dBmV EMF Vin = 60dBmV EMF Vin = 60dBmV EMF Min 3/4 3/4 3/4 3/4 3/4 38 180 3/4 3/4 3/4 20 55 3/4 3/4 Typ. 7.3 3.6 10 15 130 43 240 72 0.5 60 38 80 41 1.0 Max 11.0 7.0 3/4 3/4 3/4 48 300 3/4 3/4 3/4 75 110 3/4 3/4 Unit mA dBmV EMF dBmV EMF mVrms dBmV EMF mVrms dB % dB mVrms mVrms dB % Characteristics Supply current Input limiting voltage F/E Quiescent sensitivity Local OSC voltage Input limiting voltage Recovered output voltage FM IF Signal to noise ratio Total harmonic distortion AM rejection ratio Voltage gain AM Recovered output voltage Signal to noise ratio Total harmonic distortion Symbol ICC (FM) ICC (AM) Vin (lim) QS VOSC Vin (lim) IF VOD S/N THD AMR GV VOD S/N THD Test Circuit 1 1 1 1 2 1 1 1 1 1 1 1 1 1 6 2002-07-23 TA2132BP/BF Test Circuit 1 1 kW AM SW FM: VCC AM: OPEN 330 pF 4700 pF 2.2 mF FM 0.033 mF 22 kW VCC = 3 V 0.033 mF 9 8 DET OUT 2 kW 0.022 mF 16 75 W L1 15 0.033 mF AM RF IN 75 W L2 14 13 12 T1 11 10 Vin TA2132BP, TA2132BF 1 FM RF IN 75 W 2 T2 3 4.7 mF 4 5 6 7 BPF CF1 0.01 mF CF2 Vin 330 W FM-IF IN 50 W 270 W BPF : GFWB7 (Soshin Electric Co., Ltd.) CF1 : SFE10.7MA5 (Murata Co., Ltd.) CF2 : SFU455B (Murata Co., Ltd.) CR : CDALA10M7GA092C-B0 (Murata Co., Ltd.) Vin 7 2002-07-23 220 mF CR SW TA2132BP/BF Test Circuit 2 2SK161 470 kW 8V GND 470 kW 1 kW 5 pF FM OSC onitor 220 mF (Note 2) VCC = 3 V 0.033 mF 16 15 0.01 mF 14 13 12 11 10 9 TA2132BP, TA2132BF 1 2 3 4 5 6 7 8 Note 2: FET buff voltage gain ~ 0dB - Coil Data Coil No. L1 FM RF L2 FM OSC T1 AM OSC T2 AM IFT Test Freq. 100 MHz 100 MHz 796 kHz 455 kHz L (mH) 3/4 3/4 268 3/4 Co (pF) 3/4 3/4 3/4 470 Qo 79 76 65 60 Turns 1-2 3/4 3/4 19 3/4 2-3 3/4 3/4 95 3/4 1-3 3/4 3/4 3/4 109 1-4 2 1 2 4-6 3/4 3/4 3/4 7 Wire (mmf) 0.16UEW 0.16UEW 0.05UEW 0.05UEW 220 mF Reference Toko Co., Ltd. 666SNF-305NK Toko Co., Ltd. 666SNF-306NK Toko Co., Ltd. 5PNR-5146Y Toko Co., Ltd. 5PLG-5147X T2: AM IFT AM C.F. 4 6 VCC (BOTTOM VIEW) L2 0.1 mF 2 3/4 3/4 L1: FM RF L2: FM OSC Pin 12 T1: AM OSC FM C.F. 3 2 4 3 1 3 1 VCC 3 2 1 6 Pin 4 1 8 2002-07-23 TA2132BP/BF FM IF FM IF OUTPUT - Vin Total harmonic distortion THD (%) 0 VOD, Sens - VCC VOD (0dB = 70 mVrms) Signal 22.5 kHz AMR MOD 30% fm = 400 Hz 3 Detect output level VOD (dB) Sensitivity (dBmV EMF) Output level OUTPUT (dB) IF level, DET level (V) 10.7 MHz 22.5 kHz 0 fm = 400 Hz 0dB = 70 mVrms BW = 400 Hz~30 kHz VCC = 3.0 V DET level IF level 1000 pF -60 270 W 75 W 0 20 40 1.2 1.0 -20 10.7 MHz 22.5 kHz -20 fm = 400 Hz 0.8 -40 2 75 kHz Noise THD 1 -40 Limiting sensitivity (-3dB) -60 0.4 -80 -20 60 80 100 120 -80 1 2 3 4 5 6 7 8 Input signal level Vin (dBmV EMF) Current voltage VCC (V) FM RF (AFC ON) OUTPUT - Vin Signal 0 4 98 MHz 22.5 kHz, fm = 400 Hz 0dB = 69 mVrms, BW = 400 Hz~30 kHz, VCC = 3.0 V DET level MOD 30% fm = 400 Hz AMR 22.5 kHz IF level Noise 75 kHz 75 kHz THD 22.5 kHz 0 20 40 60 80 100 120 FM RF (AFC OFF) OUTPUT - Vin Total harmonic distortion THD (%) Signal 0 98 MHz 22.5 kHz fm = 400 Hz 0dB = 71 mVrms BW = 400 Hz~30 kHz VCC = 3.0 V AMR, MOD30% fm = 400 Hz IFlevel, DET level 1.2 1.0 0.8 -20 Output level OUTPUT (dB) Output level OUTPUT (dB) (V) 3 -20 -40 2 -40 0.4 -60 1 -60 THD -80 -20 75 kHz Noise -80 -20 22.5 kHz 0 20 40 60 80 100 120 Input signal level Vin (dBmV EMF) Input signal level Vin (dBmV EMF) FM RF (AFC ON) VOD, THD - Df Total harmonic distortion THD (%) 0 22.5 kHz 75 kHz VOD 22.5 kHz 4 0 FM RF (AFC OFF) VOD, THD - Df Total harmonic distortion THD (%) VOD 75 kHz 4 22.5 kHz Detect output level (dB) Detect output level (dB) -10 98 MHz fm = 400 Hz 60dBmV EMF VCC BW = = 1.8 V 400 Hz~ 30 kHz 75 kHz THD VCC =3V 22.5 kHz 3 -10 VCC = 1.8 V VCC = 1.8 V VCC = 3V 3 -20 2 -20 2 THD -30 -30 1 VCC = 3 V 98 MHz fm = 400 Hz 60dBmVEMF BW = 400 Hz ~30 kHz 1 -40 -300 -200 -100 0 100 200 300 0 400 -40 -300 -200 -100 0 100 0 200 300 400 Detuning frequency Df (kHz) Detuning frequency Df (kHz) 9 2002-07-23 TA2132BP/BF AM OUTPUT - Vin Vod 0 THD 30% -20 Noise THD 80% -40 1 MHz MOD30% fm = 1 kHz 0dB = 81.5 mVrms BW = 400 Hz~30 kHz VCC = 3.0 V 0 20 40 60 80 100 120 -60 -20 Input signal level Vin (dB/m) Total harmonic distortion THD (%) Output level OUTPUT (dB) 10 2002-07-23 TA2132BP/BF Package Dimensions Weight: 1.00 g (typ.) 11 2002-07-23 TA2132BP/BF Package Dimensions Weight: 0.14 g (typ.) 12 2002-07-23 TA2132BP/BF RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 13 2002-07-23 |
Price & Availability of TA2132BF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |